+ Reply to Thread
Results 1 to 4 of 4

Thread: Pressure (High)

  1. #1
    Join Date
    Nov 2009
    Posts
    104

    Default Pressure (High)

    Hello everyone,

    i have a 1300 series perkins diesel generator, it has done about 800 - 1000 hours not completely sure and the pressure of the high pressure lubricating oil system is too low. This as never happened to me before so could the pros give me some advice.


    Thanks

  2. #2
    Join Date
    Dec 2009
    Posts
    5

    Default

    Has it got a Mechanical Control Unit with lights for fault diagnosing ?

  3. #3
    Join Date
    Dec 2005
    Posts
    343

    Default

    Don't all the 1306 range have an ECu with unit injectors?
    They should have the two lights for diagnosis and a button if wired in - which they should be if someone who is approved built it.
    Charlie Farrow
    Sales Director
    http://www.wellandpower.net/
    All advice provided in these forums by us is for information only. Users of these forums should not rely on answers provided here. We accept no liability for use of this information. If you require professional advice, please contact sales for a rate.
    Perkins Generators - http://www.wellandpower.net/diesel_g...tors.generator
    Volvo Generators -
    http://www.wellandpower.net/diesel_g...ator.generator

  4. #4
    Join Date
    Feb 2008
    Posts
    180

    Default

    Hello all,

    The main problems i thought was wrong grade of lubricating oil, defective gauge or relief valve does not open

    Thanks

+ Reply to Thread

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts