Fit Perkins 4.154 in place of 104.22

[acomec]

Hi, I have a skid steer with a totalled perkins 104.22. I also have access to a Perkins 4.154 (similar power output) what I need to know is will the 154 fit with the existing mountings etc into the skid steer.
Many thanks

[wellandpower]

I would guess it won't, the 104.22 is a recently modern and compact unit, the 4.154 is an older unit which is likely to be much bigger and a different footprint.
If you have space, the only thing is to try it and see what is possible.

[acomec]

Thanks, I'm not so worried about mounting the engine in the frame as much as piping up the exhaust and inlet, there seems to be plenty of room so I suppose I'll just have to have a trip and do some measuring and comparison.
Thanks again
Joby

[wellandpower]

The engine i it will it physically I guess is bigger, so don't orget to go up to a bigger exhaust if required - otherwise the results may not be good!

Good luck!